Advertisement
Using Tabbed Stock
file:///C|/Documents%20and%20Settings/Miz%20B/My%20Documents/A_Xerox...P/Nuvera%209.0%20UGTA/Nuvera%209.0%20UGTA_FINAL/English/comp_070.htm (3 of 5)8/13/2008 1:45:49 PM
To set up and use ordered stock
Ordered stock is paper with multiple pieces, such as a carbonless form, multi-part colored stocks, etc., which need to be kept in a certain sequence.
Load tray with ordered stock
1. On the Home Screen, click the Paper Trays button.
2. Double-click or right-click a fully adjustable tray row. A Tray Properties window appears.
3. Enter all choices pertaining to the stock you wish to load into the tray.
4. In the Type pull-down menu, choose Ordered Stock from the list of stock types.
5. Enter any descriptive name for the ordered stock (ex., "Carbonless" or "5-part Color") in the Type text box (the cursor should have
automatically placed itself there.). This information will appear in the Type column of the Trays tab.
6. In the Sequence section, enter a number. This coincides with the number of parts in your ordered stock. For example, if want to load a 3 part
carbonless paper stock, enter 3 in the Sequence text box.
7. Open the fully adjustable tray you just configured, as identified in the Tray Type column of the Paper Trays window.
8. Load ordered stock that matches the settings you made in the Tray Properties window. For information on proper loading, see
Recommendations for Paper
Usage.
9. Click <OK> or <Apply>.
Submit job and choose ordered stock
With a tray properly loaded and configured with loaded stock, you are ready to submit a job which uses ordered stock.
1. Initiate a print or copy job. For example, on a copy job, select Loaded Stock from the Paper Stock menu on the Basic tab.
2. A list of loaded stock types appears. Choose the ordered stock you previously configured and loaded.
3. Make any other programming choices.
4. When satisfied with your settings, click <Copy or Print >.
NOTE: When using tabbed or ordered stocks the system may instruct you to reorder the stock in the tray to the first position if events such as
a multifeed occur. Any time a tray containing ordered stock is cycled, the system assumes that the stock in the tray has been reset to the first
position.
Use Media Optimization Mode to optimize job recovery on jobs with Serialized Stocks
You can print jobs using serialized stocks, such as checks or statements, and disable auto system job recovery. The system will require more active
operator intervention to manually insure proper job recovery following system shutdowns. A message will indicate when this media optimization mode
is enabled.
If a system fault condition occurs and requires a dynamic purge of sheets, the machine will shut down after the purge is completed. Similarly, if the
system shuts down hard with a fault condition, after clearing the jam the system will cycle up, purge the paper path contents, and shut down again.
After both of these two types of conditions, a status message will display to instruct the operator about job recovery. Be sure to disable Serialized
Stock Mode when finished to restore full auto job recovery.
To enable Serialized Stocks mode:
129 of 256
Advertisement
