Advertisement
Home
2-Tray Feed Module - two high capacity large stock
feed trays.
3-Tray Feed Module - The 3-Tray Feed Module is a
modification of the 4-Tray Feed Module. It can be
combined with a 4-Tray or a 2-Tray module. It can also
be used with the Roll Feeder device.
Roll Feeder - provides up to 25,000 11 x 17 inch size
sheets and 5 hours of continuous run time between roll
changes.
Integrated Scanner - scans single pass duplex at 120
ppm.
Post Process Module
Sheet Enhancement Module - located directly to the
right of the print engine, this module is used to remove
upcurl or downcurl in paper as it passes through the
module from the print engine.
file:///C|/Documents and Settings/Miz B/My Documents/... UGTA/Nuvera 9.0 UGTA_FINAL/English/tournuvera_00.htm (2 of 3)8/14/2008 4:27:37 PM
Basic Finisher Module - stacker/stapler with top tray.
Basic Finisher Module Plus - stacker/stapler
with bypass paper path unit.
Basic Finisher Module Plus Top Tray with Direct Connect -
stacker/stapler with bypass paper path unit with a selectable
Top Tray. Directly connects to 3rd party devices via standard
DFA interface and locking pins.
Insertion Module - As an option, both the 4-Tray and the 2-
Tray Feed Modules can be used as Insertion Modules.
Finishing Transport Module - enables inline finishing by
providing document transport capability and full DFA support to
DFA-compliant finishing devices.
17 of 256
Jam Clearance
Contacting Xerox
Advertisement
