Advertisement
|
Home
file:///C|/Documents%20and%20Settings/Miz%20B/My%20D...20UGTA/Nuvera%209.0%20UGTA_FINAL/English/mnt_020.htm8/13/2008 2:29:00 PM
|
Resources
System Tour
Powering Off the System
Follow these procedures to correctly power down the machine. While turning the machine on and off may seem self-explanatory, there
are a few conventions to adhere to, in order to avoid damage to the machine and/or loss of data.
To power off the system
There are two non-emergency methods used to power off.
Preferred power off method
1. In the user interface, click [System: Shutdown].
2. Click [Yes] to shut down the system in an orderly fashion, after all scheduled jobs are processed.
3. Click[ Interrupt] to shut down the system without completing the processing of current jobs.
4. Click [No] to return to the user interface.
5. In a few moments, the system will begin an orderly shutdown.
If the preferred power off method is not successful
1. Press the (O) symbol embossed into the button toward the back of the machine to turn the power off. For the Xerox Nuvera
288 Perfecting System, access the power switch on Print Engine A1.
2. Click [Yes] to shut down the system in an orderly fashion, after all scheduled jobs are processed.
3. Click[ Interrupt] to shut down the system without completing the processing of current jobs.
4. Click [No] to return to the user interface.
NOTE: Users should not use Printer Off, since Printer On is only available to System Administrators. If a user does select it and
needs to exit, select Restart and the system will come up to ready.
|
Search
|
Problem Solving
208 of 256
|
Index
About this Site
|
Maintenance
Advertisement
