Advertisement
|
Home
file:///C|/Documents%20and%20Settings/Miz%20B/My%20D...%20UGTA/Nuvera%209.0%20UGTA_FINAL/English/cru_20.htm8/13/2008 1:45:50 PM
|
Resources
System Tour
Replacing the Dry Ink Waste
Container
The Dry Ink Waste container gets replaced every 750,000
(750K) images. When the limit is reached, an alert will appear in
the system messages portion of the control screen.
NOTE:The alert appears before the waste container is
completely full. This gives you the opportunity to finish
any jobs in progress. As soon as the job is printed,
replace the waste container.
To replace the Dry Ink Waste Container
See
Contacting Xerox
to get the correct part number for this
container.
Make sure there are no jobs running.
1. Open the front access covers and locate the correct
container.
2. Prepare the new container for installation.
3. Remove the used container.
4. Insert the new container, making sure it is completely
seated.
5. Package the used container for return. Use the box
and prepaid return label to return the used unit to
Xerox.
|
Search
|
Problem Solving
222 of 256
|
Index
About this Site
|
Maintenance
Videos
Replacing the Dry Ink Waste
Container
Advertisement
