Advertisement
|
Home
How Do I?
file:///C|/Documents%20and%20Settings/Miz%20B/My%20D...UGTA/Nuvera%209.0%20UGTA_FINAL/English/hdi_f_070.htm8/13/2008 2:14:06 PM
|
Resources
|
System Tour
Printing Pads
You have the ability to produce printed pads on all Xerox Nuvera systems. Pads are typically single sheet forms, often with a card stock
back cover and a glued binding on the top edge. Each sheet can be torn off the pad as needed.
Keep the following points in mind when considering pad printing:
A pad printing job can only have one page image if printed one-sided, or two page images if printed duplex.
If the finisher supports the required options, a pad printing job can be offset and finished after each pad subset.
Pad printing jobs can be saved, reprinted, and forwarded.
NOTE: Combining pad printing with Special Pages or Slip Sheets is not recommended since it may produce
unexpected results.
To print a pad
You can program pads in various ways including Copy, Print from File, Job Properties, and Queue defaults. The following instructions
pertain only to the local user interface.
1. Double-click the pad job.
2. Select the Output tab.
3. Select the Stapling/Finishing FAB.
NOTE: To apply finishing to the pads job, first select the finishing, then select Finishing under Subset Output
Options, and finally select Pads Printing. If you decide to change the finishing after you have programmed the pads,
simply select Finishing and Pad Printing again. The Sheets Per Pad and Number of Pads values will return to the
values you selected prior to changing the finishing.
4. Select the Pad Printing checkbox.
5. Select the number of Sheets Per Pad and the Number of Pads to print.
NOTE: If you remove the mark from the Pad Printing checkbox during the programming of the job, the Quantity and
Collation values return to their default values and an information message displays.
6. Optionally, select the Add Back Cover checkbox, and select the Paper Stock to use for the back cover.
7. Click Print.
|
Search
|
Problem Solving
50 of 256
|
Index
About this Site
|
Maintenance
Advertisement
