Advertisement
Configuring Paper Stocks and Tray Settings
file:///C|/Documents%20and%20Settings/Miz%20B/My%...TA/Nuvera%209.0%20UGTA_FINAL/English/paper_10.htm (2 of 3)8/13/2008 2:29:05 PM
7. For Tray 2, refer to the section below on using the Rear Stop Guide.
8. Push the tray closed. The system automatically confirms the size and attributes programmed.
For fully-adjustable trays, a "Confirm Tray Contents" alert window may appear. Either Confirm the tray contents, or
click Change to enter the correct stock size/type.
For dedicated trays, a "Dedicated Tray Contents" alert will appear.
9. Either make appropriate changes in the Tray Properties window (Fully Adjustable trays) or re-load the correct paper (Dedicated
trays).
NOTE: When entering the size of Catalog Envelopes, enter the dimension of the envelope with the flap open. See
Recommendations for Paper Usage
NOTE: Trays are identified as "Fully Adjustable" and "Dedicated" in the Tray Type column of the Paper Trays window.
Load and Program Method
1. Open the fully adjustable tray.
2. Fan and load the paper stock.
3. For Tray 2, refer to the section below on using the Rear Stop Guide.
4. Push the tray closed. The system automatically senses the size. Depending on the Tray Confirmation option selected, an alert
window may display.
For fully-adjustable trays, a "Confirm Tray Contents" alert window may appear. Either Confirm the tray contents, or
click Change to enter the correct stock size/type.
For dedicated trays, a "Dedicated Tray Contents" alert will appear.
A Confirm Feeder Tray 1 message informs you of the last known paper loaded in the tray.
5. The Tray Properties window displays.
6. Either make appropriate changes in the Tray Properties window (Fully Adjustable trays) or re-load the correct paper (Dedicated
trays).
7. Click <OK>. New stock will be available from the Stock Library.
Rear Guide Stop for Tray 2 on the 4-Tray Feed Module
The Tray 2 Rear Guide Stop is designed for systems that dedicate tray 2 on the 4-Tray Feed Module for 8.5" x 11" or A4 stock. It is
designed to stabilize the rear guide in the tray improving registration. The stop is installed in the back of the tray to restrict the rear guide
from opening. The stop is set for 8.5" x 11" stock and is in the disabled position when the machine is shipped. The user can Enable the
stop by rotating the gray colored lever to the right or Disable the stop by lifting and rotating the lever to the left.
Located in back of tray
NOTE: If A4 stock is to be loaded in tray 2, service must be called to adjust the guide level.
To enable a tray
1. Right-click one of the trays in the Paper Trays window.
2. Click Enable Tray from the Tray pull-down menu.
To disable a tray
If a tray is broken, in need of service, or you do not want it used for some reason, you can disable it.
for more information, as well as a listing of all paper types the system will work with.
Enabled
151 of 256
Disabled
Advertisement
