Advertisement
Loading Special Stock For Proper Finishing Output
file:///C|/Documents%20and%20Settings/Miz%20B/My%...TA/Nuvera%209.0%20UGTA_FINAL/English/paper_21.htm (2 of 2)8/13/2008 2:29:01
**Special Case: Jobs with drilled paper AND drilled tabs when using the MFF:
When processing jobs which use drilled paper and drilled tabs together, load the tabbed stock with tabs trailing as usual, but load the
drilled paper stock with the holes leading. This is contrary to what the label on the tray depicts, but drilled stock must be loaded this
way in order to achieve correct output. If the job includes drilled tabs or drilled paper, but not within the same job, follow the diagram on
the tray label and/or the information in the table above.
Systems with SFM Insertion Module and MFF Professional
NOTE: No tabs can be loaded into an SFM Insertion Module (if present) if using a Multifunction Finisher.
Stock Type
Drilled paper
Labels
Tabs
Preprinted stock
Transparencies
Ordered stock
Systems with MFF Pro Plus ONLY
Stock Type
Drilled paper**
Labels
Trays 1,2,3,4: reverse collated tabs only **
Insertion Tray: forward collated tabs only
Preprinted stock
Transparencies
Ordered stock
More information about tabbed stocks
For more information, see
Printing/Copying on Tabbed and Ordered
Trays 3 and 4
Loading
Trays 1 and 2
Trays 3 and 4
Trays 1 and 2
Trays 3 and 4
Trays 1 and 2
Trays 3 and 4
Trays 1 and 2
Trays 3 and 4
Trays 1 and 2
Trays 3 and 4
Trays 1 and 2
Trays 3 and 4
Loading
Trays 1 and 2
Trays 3 and 4
Insertion Tray
Trays 1 and 2
Trays 3 and 4
Insertion Tray
Trays 1 and 2
Trays 3 and 4
Insertion Tray
Trays 1 and 2
Trays 3 and 4
Insertion Tray
Trays 1 and 2
Trays 3 and 4
Trays 1 and 2
Trays 3 and 4
Insertion Tray
Stock.
157 of 256
Face up, right edge leading, 1-
N order
Holes trailing
Holes trailing
Label side up
Label side up
Tabs trailing (loaded into pre-
fuser FM only)
Tabs trailing (loaded into pre-
fuser FM only)
Face up, right edge leading
Face up, right edge leading
Tape edge trailing
Tape edge trailing
Face up, right edge leading, 1-
N order
Face up, right edge leading, 1-
N order
Holes trailing
Holes trailing
Holes trailing
Label side up
Label side up
Label side up
Tabs trailing - face up
Tabs trailing - face up
Tabs leading - face up
Face up, right edge leading
Face up, right edge leading
Face up, right edge leading
Tape edge trailing
Tape edge trailing
Face up, right edge leading, 1-
N order
Face up, right edge leading, 1-
N order
Face up, right edge leading, 1-
N order
PM
Advertisement
