Advertisement
Non-standard Paper Performance Performance Matrix
file:///C|/Documents%20and%20Settings/Miz%20B/My%2...uvera%209.0%20UGTA_FINAL/English/spec_paper_30.htm (2 of 2)8/13/2008 5:01:11 PM
LEF: Long Edge Feed
Best: Best system performance
Good: Good system performance
Fair: Significant performance degradation is likely, particularly paper handling.
NR: Not Recommended. Exceeds system design. Unacceptable performance likely.
**: Same performance as shown in
20 lb. Standard Paper Table
Notes:
a. The output will go to the Top Tray in an MFF-equipped machine, and cannot be stapled.
b. Refer to
Table 5
or to the paper tray label for the correct paper loading orientation.
c. Embossed letterhead may cause degraded paper handling, and possibly image deletion defects near the embossed area on either side
of the paper.
d. Refer to
Table 5
for more information.
e. Image deletion defects might occur near the perforation, especially if the perforation is parallel to the feed direction.
f. 2-sided copies or prints should not be selected when this stock is used.
g. Blank or preprinted covers are acceptable.
for the corresponding paper sizes.
199 of 256
Advertisement
