The Sheet Enhancement Module on the Xerox Nuvera EA Production System and the Xerox Nuvera 288 Perfecting System is a standard component on all configurations except for

those with a Multifunction Finisher.

Located to the right of the print engine, it is used to remove upcurl or downcurl in paper as it passes through the module from the print engine. This feature is performed automatically

by the system when the Decurl Automatic Mode is selected. You can also manually adjust the amount of decurl to apply for the job if more decurl is needed. Select the Manual or

Automatic mode settings at the FreeFlow Print Server from the Printer menu. For more information, see

Sheet Enhancement Module Specifications

Height: 41.5 "

Width: 14.25 "

Depth: 28.25 "

Weight: 168 lbs.

file:///C|/Documents%20and%20Settings/Miz%20B/My%20D...0UGTA/Nuvera%209.0%20UGTA_FINAL/English/wdtbd_70.htm8/13/2008 5:57:24 PM

Resources

System Tour

Problem Solving

Managing Paper

22 of 256