Advertisement
Finisher Specifications
file:///C|/Documents%20and%20Settings/Miz%20B/My%...GTA/Nuvera%209.0%20UGTA_FINAL/English/spec_40.htm (2 of 4)8/13/2008 4:44:15 PM
Up to 100 sheets of 20 lb bond (75 gsm) (one or two staples) or
equivalent substrates (reduced stapled sheet capabilities can result
based on substrate properties (i. e. thickness, density, material, coating,
etc.)
Includes two internal pass-through 100 sheet upside down staplers. The
stapler devices have the ability to portrait, landscape or dual staple all
supported paper sizes. Finished sets can be stacked internally to the
lower stacker tray.
Stapler Capacity
If either of the Staplers runs out of staples see
jams see
An alternate Staple Cartridge for up to 30 sheets of 20lb is available. (75-
80 gsm) paper capacity.
Each Stapler Cartridge holds 5000 staples.
on ordering refills.
Paper Size Range
process direction
8.26 in to 18.5 in (210 mm to 457 mm)
cross process direction
8.26 in to 12 in (210 mm to 305 mm)
Stock Weight Range
uncoated:
16 lb bond to 113 lb index (56 to 220 gsm)
coated:
No coated stock
The MFF Professional Model
MFF Stapling
Portrait, Landscape and Dual stapling is available for all media types, except Tabs and Transparencies. Stapling is offered for mixed
sized sets if the length of the feed edge is the same size for all sheets.
For details and specifications on the staplers, see
MFF Capacities
The Xerox Nuvera Multifunction Finisher (MFF) adds the finishing touches to your job by collating and stapling your output. The MFF
Professional can be used to make folded and stapled booklets and various folding options; Folded-Only Booklets, Tri-Fold C-
Configuration and Z-Configuration folded documents.
2,250 sheet total capacity of 20 lb. (75-80 gsm) paper or equivalent
250 sheet Top Tray
2,000 sheet Main Tray
1 and 2 Position Stapling in Main Tray
100 sheet staple capacity, sizes 8.5 x 14 inch or B4 and smaller.
50 sheet staple capacity paper sizes over 8.5 x 14 inch or B4.
Top Tray
Output to the Top Tray is delivered with Side-1 down and sets are not offset. The Top Tray can hold up to 250 sheets of 20 lb. (75-80
gsm) or equivalent paper. It can be set as a destination tray for non-stapled jobs. Copies that are less than 6.7 inches long in feed
direction or 8 inches in the cross-feed direction will go to the Top Tray rather than the Main Tray. The Top Tray also receives sheets
that are purged from the system when using the Main Tray or the Bottom Tray.
Main Tray
The Main Tray is the output tray for receiving compiled stapled and unstapled sets as well as single sheets. Output is delivered with
Side-1 down and sets are offset. It can staple up to 100 sheets of 8.5 x 11 inch or A4 LEF, and 8.5 x 14 inch or B4 SEF of 20 lb. (75-80
gsm). It also can staple up to 50 sheets for paper sizes over 8.5 x 14 inch or B4 SEF of 20 lb. (75-80 gsm). Portrait, landscape, and
dual position stapling are available.
"Stack Limit" allows you to set the Main Tray to the size of the stack from 200 to 2500 sheets. Once the set stack limit is achieved, the
system will cycle down and display an Empty Main Tray message. The default setting is 2500 sheets.
Bottom (Booklet) Tray
The Bottom Tray is the output tray for receiving compiled stapled and unstapled booklets. It can receive up to 20 booklets of 15 sheets
maximum of 8.5 x 11 inch or A4, 8.5 x 14 inch or Foolscap, and 11 x 17 inch or A3 20 lb. (75-80 gsm) or equivalent thickness with the
Bottom Tray Stop in the up position. It also can receive Folded-Only Booklet up to 5 folded sheets per set of 8.5 x 11 inch or A4, 8.5 x
14 inch or Foolscap, and 11 x 17 inch or A3 or equivalent thickness with the Bottom Tray Stop in the up position. It can receive Tri-Fold
C-Configuration and Tri-Fold Z-Configuration of single sheets only of 8.5 x 11 inch or A4 SEF.
Clearing Staple
Jams.
Contact Xerox
for information on ordering refills.
Contact Xerox
Stapler
Specifications.
Contact Xerox
Contact Xerox
175 of 256
Same
Replacing Staples
or if it
for information
Same
Same
to order this consumable part.
to order this consumable part.
Advertisement
