Advertisement
|
Home
file:///C|/Documents%20and%20Settings/Miz%20B/My%2.../Nuvera%209.0%20UGTA_FINAL/English/mnt_diag_00.htm (1 of 3)8/13/2008 2:29:06 PM
|
Resources
System Tour
Running User Diagnostics
You may be prompted by the Xerox Nuvera, or by a Customer Support representative to access and run diagnostic routines. The
diagnostic routines are useful for getting the system back into proper calibration or adjustment, and/or as a part of general system
maintenance.
Selecting and running any of the User Diagnostic routines modifies the system settings and may change the
performance of your Nuvera. Use the User Diagnostic routines and settings only with the direction of an authorized
To access User Diagnostics
1. In the Xerox Nuvera user interface, select [System: User Diagnostics]. The User Diagnostics window appears. Depending
on your system configuration, available diagnostic routines are listed.
2. After checking with your authorized Xerox representative, select one of the routines to begin a diagnostic routine or to enable/
disable a routine or algorithm.
3. Follow the on-screen instructions for information on how to run and perform the diagnostic routine. If you need further
information on how to achieve certain results, contact Call for Assistance.
Document Scanner
Document Glass Scanner Setup - for systems with an integrated scanner, use to establish the position of the Document
Glass top and left registration edges, and set the scan speed of the Document Scanner.
Print Engine
Xerox Nuvera EA Production System
For the
dC0604 PE Registration Setup - use to align and register the image on side 1 with the image on side 2.
dC0943 Corotron Cleaning Routine - use weekly to remove dust and dirt that has built up on the corotron.
Image Quality Setup - use if experiencing image quality problems after running the Corotron Cleaning routine.
Print Engine A1
For the Xerox Nuvera 288 Perfecting System, select one of the following routines when running Print Engine A1 only. Note that Print
Engine A1 is the print engine on the left, directly following the feeder modules.
dC0604 PE Registration Setup - use to align and register the image on side 1 with the image on side 2.
dC0943 Corotron Cleaning Routine - use weekly to remove dust and dirt that has built up on the corotron.
Image Quality Setup - use if experiencing image quality problems after running the Corotron Cleaning routine.
Print Engine A2
For the Xerox Nuvera 288 Perfecting System, select one of the following routines when running Print Engine A2 only. Note that Print
Engine A2 is the print engine on the right, between Print Engine A1 and the Sheet Enhancement Module.
dC0604 PE Registration Setup - use to align and register the image on side 2 with the image on side 1.
dC0943 Corotron Cleaning Routine - use weekly to remove dust and dirt that has built up on the corotron.
Image Quality Setup - use if experiencing image quality problems after running the Corotron Cleaning routine.
System
|
Search
|
Problem Solving
CAUTION!
Xerox representative.
, perform the following routines as needed.
234 of 256
|
Index
About this Site
|
Maintenance
Advertisement
