Advertisement
|
Home
How Do I?
Xerox Nuvera® EA Production
System
The Xerox Nuvera EA Production System includes a
wide range of configuration options based on your
printing and publishing needs. You can select certain
types of Sheet Feed Modules and Finishing modules to
install with your system, as well as choose certain
feature software licenses.
Basic Configuration
The basic configuration of a Xerox Nuvera EA
Production System includes the following:
4-Tray or 2-Tray Sheet Feeder Module (SFM)
Control Console
Print Engine
Sheet Enhancement Module (not available if
an MFF module is attached)
Multifunction Finisher (either the Professional
MFF or the Pro Plus MFF) or Basic Finishing
Module (BFM)
The base FreeFlow Print Server licensing
includes 100 or 120 print speed, EA dry ink
(toner), single print queue, no Stock Library,
125 lpi halftone screen for use with PS/PDL,
TIFF, ACSII and PCL
Sheet Feed Modules
4-Tray Feed Module - two standard stock size and two
large stock size feed trays. It can also be used with the
Roll Feeder device.
file:///C|/Documents and Settings/Miz B/My Documents/... UGTA/Nuvera 9.0 UGTA_FINAL/English/tournuvera_00.htm (1 of 3)8/14/2008 4:27:37 PM
|
Resources
|
System Tour
Additional Configurations
You can customize the system by identifying whether to include
an integrated scanner, a second Sheet Feeder Module, an
insertion module and the complexity of your finishing devices.
The type of finisher you select can determine what other
modules and license configuration options can be included.
The following modules are available for your system:
An optional second 2-Tray or 4-Tray Sheet Feeder
Module for a total of two SFMs
An optional 3-Tray Sheet Feeder Module (either the 3-
Tray or 4-Tray SFM can be used with a Roll Feeder
attached)
The optional integrated Document Scanner Module
(available only with the 4-Tray Sheet Feeder Module)
An optional Insertion Module (a 2-Tray or 4-Tray
SFM)
Multifunction Finisher (Professional or Pro Plus)
One or two Basic Finishing Modules (BFM or BFM
Plus)
Finishing Transport Module (FTM)
Third party finishing devices
Your Xerox Nuvera EA Production System can be configured
with a variety of modules. Select the links below for information
on the individual modules that can be installed.
Finisher Modules
Multifunction Finisher Professional - Professional model
offers stacking/stapling, booklet making and c/z-folding.
Multifunction Finisher Pro Plus - The Pro Plus model adds to
the Professional capabilities by also offering hole punching and
an insertion module.
|
Search
|
Problem Solving
16 of 256
|
Index
About this Site
|
Maintenance
Licensed Features
The software options available to you depend on the
licenses that were installed and enabled on your system
at installation. The following lists some of the major
licenses available for the system. Check with your
System Administrator for more information on what
licenses are enabled.
Productivity Pack - when enabled, this license
provides multiple print queues instead of one queue,
Stock Library management, shows all media attributes,
and is required for LCDS and IPDS printing. Also
includes the ability to enter exactly the paper weight,
between 56 gsm and 250 gsm (upper weight depends
on finisher type) for the stock that is being loaded.
Enhanced Line Screen - when enabled, this license
allows all valid halftones to print (85 lpi, 106 lpi, 125 lpi,
134 lpi and 156 lpi) and offers additional halftone image
quality settings.
PCL License
Ethernet License - Bus & Tag are optional
PS License
DFA License
Imposition License
LCDS License
IPDS License
VIPP License (FreeFlow VI Interpreter)
Disk Overwrite License
Full, Basic, CPW (XPP) or ISO Diagnostics License
Speed License - 100, 120 or 144 ppm are available on
systems with a BFM/BFM Plus and/or FTM. The
100/120 license is on systems with MFF.
Things you need to know
These links lead to pages that provide information on
some of the more important things you need to know
about your Xerox Nuvera System.
Loading Paper
Paper Tray Programming
Image Quality
Advertisement
