Advertisement
|
Home
file:///C|/Documents%20and%20Settings/Miz%20B/My%20D...0UGTA/Nuvera%209.0%20UGTA_FINAL/English/imgedt10.htm8/13/2008 2:22:37 PM
|
Resources
|
System Tour
Erasing Unwanted Marks On Originals
Sometimes the original document you are copying or scanning contains markings near the edges that you wish to remove. Examples of
unwanted edge markings could be:
Wrinkled, torn, or other damage near the original document's edges
Hole punches
Handwriting or other errant marks near the document's edges
The edge of the paper causing a shadow
Erase Options
There are two methods for deleting unwanted edge markings:
Edge Erase: This method allows you to set different deletion widths to every edge of the page in the original document. This method is
useful for damaged documents or documents that have errant markings on some but not all edges.
Border Erase: Using this setting, one deletion width is set and applied to all edges of the document. This method is useful for originals
on colored paper, or documents that have the same unwanted edge content on every page.
To erase an edge
1. On the Home Screen, initiate a copy or print job.
2. On the Image Edit tab, click the Edge Erase button.
3. On the Edge Erase drop-down menu, select either Border Erase or Standard Edge Erase.
4. Use the spinner boxes to set the area (or areas if you selected Edge Erase) you want Edge Erase to cover.
Other ways to work with edge-to-edge imaging
See
Edge-to-edge printing
for information on more ways to utilize edge-to-edge imaging.
|
Search
|
Problem Solving
100 of 256
|
Index
About this Site
|
Maintenance
Advertisement
