Advertisement
|
Home
How Do I?
file:///C|/Documents%20and%20Settings/Miz%20B/My%...TA/Nuvera%209.0%20UGTA_FINAL/English/paper_21.htm (1 of 2)8/13/2008 2:29:01
|
Resources
|
System Tour
Loading Special Stock for Proper Finishing Output
Depending on the finishing devices that are present on your system, special paper stock must be loaded in certain ways to achieve
correct output. To ensure correct output and to avoid manual collation, load as indicated by the labels on each paper tray and follow the
guidelines below.
If you are using a 2-Tray Sheet Feed Module, follow the guidelines for loading stocks in trays 3 and 4.
NOTE: For information about loading tabbed stock in the Sheet Feed Module, see
need to have the Tabs Guide installed in the feed tray that contains the tabbed stock.
NOTE: As an aid to you, there are illustration decals on each paper tray which will help you to load stock correctly.
NOTE: For best results and most efficient operation, load special stocks LEF in the paper trays. Loading special stocks SEF
may result in pages delivered with incorrect rotation and face-up or face-down delivery. Special programming may be required
to correct.
Systems with SFM and/or Insertion Module and BFM
Stock Type
Drilled paper
Labels
Tabs (forward collated tabs only)
Preprinted stock
Transparencies
Ordered stock
Systems with MFF ONLY
Stock Type
Drilled paper**
Labels
Tabs** (reverse collated tabs only)
Preprinted stock
Transparencies
Ordered stock
|
Search
|
Problem Solving
Loading
Trays 1 and 2
Trays 3 and 4
Trays 1 and 2
Trays 3 and 4
Trays 1 and 2
Trays 3 and 4
Trays 1 and 2
Trays 3 and 4
Trays 1 and 2
Trays 3 and 4
Trays 1 and 2
Trays 3 and 4
Loading
Trays 1 and 2
Trays 3 and 4
Trays 1 and 2
Trays 3 and 4
Trays 1 and 2
Trays 3 and 4
Trays 1 and 2
Trays 3 and 4
Trays 1 and 2
Trays 3 and 4
Trays 1 and 2
156 of 256
|
Index
About this Site
|
Maintenance
Using the Feed Module Tab
Holes leading
Holes leading
Label side up
Label side up
Tabs trailing - face up
Tabs trailing - face up
Face up, left edge leading
Face up, left edge leading
Tape edge leading
Tape edge leading
Face up, 1-N order
Face up, 1-N order
Holes trailing
Holes trailing
Label side up
Label side up
Tabs trailing - face up
Tabs trailing - face up
Face up, right edge leading
Face up, right edge leading
Tape edge trailing
Tape edge trailing
Face up, right edge leading, 1-
N order
PM
Guides. You
Advertisement
