Advertisement
Making a Booklet
file:///C|/Documents%20and%20Settings/Miz%20B/My%2...TA/Nuvera%209.0%20UGTA_FINAL/English/hdi_f_040.htm (2 of 2)8/13/2008 2:14:08 PM
PDF Booklets
Follow the steps below to properly program booklets created using Adobe Acrobat PDF files.
To create an 11x17 folded booklet out of 8.5x11 size originals from PDF files, program the job for 8.5x11 paper,
use Fit to new Paper Size, and choose 11x17 as follows:
1. In the Nuvera Print Driver, select the Paper/Output tab.
2. Set Paper Size to size of the job (8.5x11).
3. Select booklet fold if it applies to your job.
4. Select the Image Options tab.
5. Set the Margins to None.
6. Select the Layout/Watermark tab.
7. Set Page Layout to Booklet Layout.
8. Select Fit to New Paper Size and set the output paper size to 11x17.
Landscape duplex
When printing a landscape document using the PCL driver, select the opposite duplexing option from the one you
options reversed
want. 2 Sided Print and 2 Sided Print, Flip on Short Edge are reversed. This also breaks Booklet Layout for
landscape jobs. So to print a booklet using a landscape job, send the job to the FreeFlow Print Server and hold it.
Program the Booklet Layout in the job properties and release it.
For more information on printing from a client application, see
For detailed information about the controls used in these workflows, see the Xerox Nuvera online Help system.
Printing from your
46 of 256
PC.
Advertisement
