Advertisement
file:///C|/Documents%20and%20Settings/Miz%20B/My%2...TA/Nuvera%209.0%20UGTA_FINAL/English/hdi_f_020.htm (1 of 2)8/13/2008 2:14:03 PM
Using the Multifunction Finisher (MFF) Pro Plus
Using the MFF Pro Plus allows you to finish your jobs using the same features available on the MFF Professional but also includes an
insertion module that offers these additional finishing features:
An Insertion Tray for inserting preprinted tabs, covers and colored sheets into your job
A 2/3 or 2/4 Hole Punch capability
To Insert Preprinted Sheets on the MFF Pro Plus
To insert covers, preprinted tabs or colored paper into your job, follow these steps:
1. On the Home Screen, select Paper Trays.
2. Select the paper tray (for example, Tray 5 Insertion Tray or Finisher A, Tray 1) and right-click on the tray.
3. Select [Properties]. To use a particular stock type for the tray or change other properties, select those attributes to match
what will be loaded in the Insertion Tray.
4. Click <OK>.
5. At the MFF Insertion Tray, adjust the guides for the paper size and load paper in the Insertion Tray with text face up and
according to the label. Load tabbed stock with tabs leading.
6. On the Home Screen, open your job.
7. Select [Special Pages].
8. Select [Inserts] and define the insertion page range for the job.
9. Print the job.
To Hole Punch Jobs on the MFF Pro Plus
If the 2/3 Hole Paper Punch is installed on the Pro Plus, you can indicate that you want to finish and punch your printed documents with
2 or 3 holes at the lead edge. If the 2/4 Hole Paper Punch is installed, you can identify your documents to be finished and punched with
2 or 4 holes. The various punch finishing options, such as hole punching Portrait Top or Landscape Right, are selectable from the
Output tab, the Stapling/Finishing area on the FreeFlow Print Server interface. Use this hole punching feature if you want to easily
place your finished document in a 2, 3 or 4 ring binder.
Do not use this feature on labels, transparencies, envelopes, or synthetic paper.
Paper Specifications for the Hole Punch Module
Type
Size
171-321mm (6.74-12.63 in) width
2-punch
148-457mm (5.83-17.99 in) length
232-321mm (9.14-12.63 in) width
3-punch
148-457mm (5.83-17.99 in) length
255-321mm (10.04-12.63 in) width
4-punch
148-457mm (5.83-17.99 in) length
1. Select Job Manager or Copy and open the job.
2. Select the Output tab and the Stapling/ Finishing FAB.
3. From the Stapling/Finishing pull-down menu, select the type of hole punch finishing, staple finishing, or both (multiple
finishing) to apply.
4. Click <OK>
5. Print the job. Hole punch finishing output is sent to the Top Tray or the Main Tray.
Weight
56-200 gsm
56-200 gsm
56-200 gsm
56 of 256
Advertisement
