Advertisement
|
Home
file:///C|/Documents%20and%20Settings/Miz%20B/My%2...uvera%209.0%20UGTA_FINAL/English/spec_paper_30.htm (1 of 2)8/13/2008 5:01:11 PM
|
Resources
|
System Tour
Stock Types Performance Matrix
The Xerox Nuvera can process a wide array of stock types. Use the following topics to learn how each stock type can be expected to
perform in the system.
NOTE: Performance of the following stock types may not be equivalent to papers in the same weight range.
Throughput Material
Window stock
Letterhead
Pre-printed forms
Pre-drilled/pre-punched holes (standard locations)
Mylar reinforced
Transparencies
NOTE: The paper path/sensors in the Xerox Nuvera do not require that you feed transparencies with
removable stripes. If you have this type of media, you can use it, but the stripe is not necessary for proper
function.
NOTE:For dedicated transparency trays, first place approximately half an inch (12 mm) worth of plain paper at
the bottom of the tray. This will ensure that all 50 of the transparencies get used.
Clear/plain
Non-removable white stripe
Removable stripe
Paper backed
Labels
GBC brand or pre-punched with rectangular holes: (holes on long
edge). This type of paper only works when holes are at the rear of the
paper tray.
Never Tear type
Drafting Film
Perforated:
Perforations parallel to the feed direction
Perforations perpendicular to the feed direction
Envelopes (standard medium to large letter size)
Tabs
Carbonless
Textured papers, Vellum Bristol papers
Smooth cover index stock
Table Legend
SEF: Short Edge Feed
|
Search
|
Problem Solving
LEF (mylar on long edge)
SEF
LEF
SEF
SEF Do Not Use
LEF
LEF
SEF
LEF
SEF
198 of 256
|
Index
About this Site
|
Maintenance
Note
b,
c
b
b
f
f
f
f
d
b
d
(Load with
holes AWAY
from user.)
e
e
g
Advertisement
