Front Panel Operations
Setting Up Keysight E5260/E5270
To Select Monitor Items
The following procedure selects the items displayed in the Setup Data area.
1. Press the
key.
Menu
2. Move the cursor to MON_ITEM, then press the
3. Move the cursor to ITEM1 for the Setup Data 1 area, then press the
4. Press the arrow keys to select the monitor item; OUT (source output value),
CPL (compliance value), VMR (voltage measurement range setting), IMR
(current measurement range setting), or ERR (error number).
5. Press the
key to make the setup effective, or press the
Enter
changing the setup.
6. Move the cursor to ITEM2 for the Setup Data 2 area, then press the
7. Perform 4 and 5 to set the item for ITEM2.
8. Press the
key twice to close the setup menu.
Exit
5-6
key.
Enter
Exit
Keysight E5260/E5270 User's Guide, Edition 6
key.
Enter
key to cancel
key.
Enter