Archiving And Restoring Factory Calibration Data Files; Selection Of Usb Memory Device; Tools Required; Data Backup Or Restore Using Alignment Data Wizard - Keysight Technologies X Series Security Features And Document Of Volatility

Memory Sanitization and Removal Procedures

Archiving and Restoring Factory Calibration Data Files

Archiving and Restoring Factory Calibration Data Files
This section describes how to archive ("back up") the instrument's factory
calibration data to an external USB memory device, or restore the calibration
data from an external memory device.

Selection of USB Memory Device

The appropriate choice of USB Memory Device depends on the circumstances.
In cases where the calibration data will not need to be brought into a
controlled area, a USB Flash drive is generally a good choice.
In cases where the calibration data must be moved into a controlled area, USB
Flash devices are not permitted. In these cases, a good choice is to back up the
calibration data to write-once optical media such as a CD-R, DVD±R or BD-R
disc.
The optical disc can be written using an external writer device outside the
controlled area, and then read using a further external reader device situated in
the controlled area.

Tools Required

To perform backup or restore operations, you need:
— a mouse with a USB interface
— an alphanumeric keyboard with a USB interface
— a portable USB Memory Device. For details, see

Data Backup or Restore using Alignment Data Wizard

The Alignment Data Wizard is launched directly from the instrument
application software interface, so you do not need to exit the application
software before proceeding.
Follow the steps below to start the wizard:
1. Plug the mouse's USB cable into one of the instrument's USB ports.
2. Plug the USB Memory Device into another of the instrument's USB ports. For details of
3. Plug the USB keyboard into another of the instrument's USB ports.
4. Press System > Alignments > Backup or Restore Align Data...
5. If you are prompted to enter the Administrator password, enter either Keysight4u!,
6. When prompted, press OK to close the analyzer program.
7. The
Security Features & Document of Volatility
Device" on page 31.
appropriate devices, see "Selection of USB Memory Device" on page
or agilent4u, depending on your instrument's software version.
Alignment Data Wizard
"Selection of USB Memory
dialog appears, as shown in
31.
Figure 5-3:
31