Save And Recall Files - Keysight Technologies FieldFox Quick Reference Manual

Save and Recall Files

Save current settings and calibration, trace data (CSV)
and .S1P), or a picture of the FieldFox screen.
Press Save/Recall 9
Device
1. Then
be saved. Choose from the following:
Internal
-
internal memory.
SD Card
-
card.
USB
Saves/Recalls files to or from a USB Flash
-
drive.
File Type
2. Then
State
-
calibration for ALL Modes to an *.sta file.
Trace + State
-
SA mode) and instrument settings to an *.sta file.
Picture (PNG)
-
file.
Data (S1P)
-
an *.S1P file.
Data (CSV)
-
mode to a *.csv file.
3. Then press
specified device location.
Recall
4. Press
to set the LOCATION where the file is to
Saves/Recalls files to or from the FieldFox
Saves/Recalls files to or from the mini SD
Saves ALL FieldFox instrument settings and
Saves the current trace (all traces in
Saves the FieldFox screen to a *.png
Saves CAT and NA Mode trace data to
Saves trace data from the current
Save
to save the specified file type to the
to read an *.sta file into the FieldFox.
16