Mitsubishi Eclipse 1990 Service Manual page 2024

SRS Troubleshooting/Maintenance/Post-collision Diagnosis
SRS check harness
613)
.
0 0 0 0 3 8 2 4
Measure at SRS check harness connector (5).
Disconnect SRS-ECU connector
Connect check harness connector (3)
Ignition switch: ON
Voltage between the terminal (13) and ground
OK: 9 or more
Voltage between the terminal (14) and ground
OK: 9 or more
OK
Check the harness
connector.
OK
Replace the SRS-ECU
Measure at SRS check harness
connector (5).
Disconnect connector
Connect SRS check harness
connector (3)
Continuity between terminals (20)
OK: Continuity
Check trouble symptom.
R e p a i r
MAINTENANCE
The SRS must be inspected by an Authorized
after the car manufacture date.
Service.)
POST-COLLISION DIAGNOSIS
To inspect and service the
or not the air bags has deployed), perform the following steps.
SRS AIR BAG CONTROL
MEMORY CHECK
1. Connect the scan tool to the data link connector.
Caution
Turn the ignition switch
connecting the scan tool.
Revision
NG
to
after a collision
before
,
00
or