Lucent Technologies LambdaXtreme Alarm Messages And Trouble Clearing Manual page 308

TAPs for SYSTEM and PortOther Alarm
Groups
TAP-607: Clear 'SUPVY transmitting LOS'
....................................................................................................................................................................................................................................
6 - 1 6 8
............................................................................................................................................................
Notify the person responsible for the service assigned to this circuit
8
pack to ensure that it is not being used for service.
............................................................................................................................................................
Replace the RP circuit pack as indicated in the AID column of the
9
report from Step
Install Circuit Pack"
..........................................................................................................................................................
Obtain another report (as in
10
listed?
IF...
YES
NO
............................................................................................................................................................
Remove the replacement circuit pack (installed in
11
the original circuit pack. For details, go to
Install Circuit Pack"
............................................................................................................................................................
CAUTION
SERVICE AFFECTING – This step could result in service
interruption.
Replace the fiber jumper between the SUPVY (OUT) and RP (SUP
12
Rx) circuit pack.
..........................................................................................................................................................
Examine the NE Alarm List
13
IF...
YES
NO
Lucent Technologies - Proprietary
See notice on first page
1. For details, go to "DLP-608: Remove and/or
(7-20).
Step 1). Is the same failure condition still
THEN...
Continue with
Go to Step
(7-20).
. Is the same failure condition still listed?
THEN...
Contact the appropriate maintenance
support organization for further
technical assistance.
Continue with
Trouble Clearing Tasks
Step 11.
14.
Step 9) and reinstall
"DLP-608: Remove and/or
Step 14.
365-575-783R1.1
Issue 1, June 2002