Lucent Technologies LambdaXtreme Alarm Messages And Trouble Clearing Manual page 239

TAPs for PortOM_OD Alarm Group
TAP-306: Clear 'OMS LOS: 0GHz and
100GHz offset at OD (0GHz offset)'
....................................................................................................................................................................................................................................
365-575-783R1.1
Issue 1, June 2002
..........................................................................................................................................................
Examine the NE Alarm List
13
IF...
YES
NO
............................................................................................................................................................
Remove the replacement circuit pack (installed in
14
the original circuit pack. For details, go to
Install Circuit Pack"
..........................................................................................................................................................
Obtain another NE Alarm List report (refer to Step 1). Is the same
15
failure condition still listed?
IF...
YES
NO
............................................................................................................................................................
Notify the person responsible for the optical line or channel associated
16
with the service assigned to this optical multiplex section that the
section can be returned to service.
............................................................................................................................................................
Perform baseline on the OA if it was replaced. For details, refer to
17
"DLP-613: Baseline Optical Parameters"
............................................................................................................................................................
Reinstall the shelf cover. For details, go to
18
Front Cover" (7-17).
E S
N D O F T E P S
.........................................................................................................................................................................................................................................................
Lucent Technologies - Proprietary
See notice on first page
. Is the same failure condition still listed?
THEN...
Continue with Step 14.
Continue with
(7-20).
THEN...
Contact the appropriate maintenance
support organization for further
technical assistance.
Continue with
(7-38).
Trouble Clearing Tasks
Step 16.
Step 9) and reinstall
"DLP-608: Remove and/or
Step 17.
"DLP-607: Remove/Install
6 - 9 9