Lucent Technologies LambdaXtreme Alarm Messages And Trouble Clearing Manual page 247

TAPs for PortOM_OD Alarm Group
TAP-308: Clear 'OMS LOS: 100GHz offset
at OD (100GHz offset)' or 'OMS LOS:
150GHz offset at OD (150GHz offset)'
....................................................................................................................................................................................................................................
365-575-783R1.1
Issue 1, June 2002
For a 40G End Terminal, replace the OD(40G 0GHz offset).
For an OADM Terminal, replace the OD(OADM 0GHz offset).
For details, go to
(7-20).
..........................................................................................................................................................
Examine the
15 NE Alarm List
IF...
YES
NO
............................................................................................................................................................
16 Remove the replacement circuit pack (installed in
reinstall the original circuit pack. For details, go to
Remove and/or Install Circuit Pack"
..........................................................................................................................................................
Examine the NE Alarm List
17
IF...
YES
NO
............................................................................................................................................................
Notify the person responsible for the optical line or channel associated
18
with the service assigned to this optical multiplex section that the
section can be returned to service.
............................................................................................................................................................
Reinstall the shelf cover. For details, go to
19
Front Cover" (7-17).
E S
N D O F T E P S
.........................................................................................................................................................................................................................................................
Lucent Technologies - Proprietary
See notice on first page
"DLP-608: Remove and/or Install Circuit Pack"
. Is the alarm condition still listed?
THEN...
Continue with
Go to Step
(7-20).
. Is the alarm condition still listed?
THEN...
Consult the appropriate maintenance
support organization for further
technical assistance.
Continue with
Trouble Clearing Tasks
Step 16.
19.
Step 14) and
"DLP-608:
Step 19.
"DLP-607: Remove/Install
6 - 1 0 7