....................................................................................................................................................................................................................................

clearHigh

clearLow

365-575-783R1.1

Issue 1, June 2002

The clearHigh alarm-clearing threshold defines the value that the

gauge must reach in order to clear the QOS notification. This value,

when combined with the switch state, controls the clearing of the

notification. If notifyHigh's on/off switch is on and the gauge value

becomes equal to or less than the clearHigh's gauge value (in the

negative going direction) then the defined event notification is cleared.

Important! ClearHigh is non-provisionable and is fixed to be 10%

lower than the value of notifyHigh.

The clearLow alarm-clearing threshold defines the value that the

gauge must reach or exceed in order to clear the QOS notification.

This value, when combined with the switch state, controls the clearing

of the notification. If notifyLow's on/off switch is on, and the gauge

value becomes equal to or higher than notifyLow's gauge value (in a

positive going direction), then the defined event clearing is triggered.

Important! ClearLow is non-provisionable and is fixed to be 10%

higher than the value of notifyLow.

Lucent Technologies - Proprietary

See notice on first page

Performance Monitoring

4 - 2 3

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the LambdaXtreme and is the answer not in the manual?

Clearing Qos Alarms - Lucent Technologies LambdaXtreme Alarm Messages And Trouble Clearing Manual