Trouble Clearing Tasks; Overview - Lucent Technologies LambdaXtreme Alarm Messages And Trouble Clearing Manual

6

Trouble Clearing Tasks

Overview

....................................................................................................................................................................................................................................
Purpose
Trouble Analysis
Procedures (TAPs)
....................................................................................................................................................................................................................................
365-575-783R1.1
Issue 1, June 2002
This chapter covers procedures for fixing the conditions that cause
alarm conditions to be reported.
Successful technical assistance relies on gathering system information.
A local visual inspection of the equipment may be made, but most
internal hardware problems are detected and corrected using the
™
LambdaXtreme Transport CIT. The LambdaXtreme Transport CIT is
used to obtain detailed information about the system. The
LambdaXtreme Transport CIT retrieves detailed reports about
performance monitoring, alarms and status, and configurations for the
local and remote OLS network elements.
The Trouble Analysis Procedures (TAPs) found in this document
provide detailed instructions on how-to:
•
Replace faulty circuit packs
•
Obtain performance reports
•
Retrieve alarm and status reports
This information is analyzed to determine the status of the system. If
a condition cannot be corrected, the technician is then directed to
contact the local maintenance engineering group for technical
assistance.
Clear alarm conditions in the following order: controllers(s),
transmission, other.
Lucent Technologies - Proprietary
See notice on first page
6 - 1