Lucent Technologies LambdaXtreme Alarm Messages And Trouble Clearing Manual page 158

TAPs for the SLOT, SHELF, and FAN
Alarm Groups
TAP-107: Clear 'FLASH memory module
code mismatch'
Procedure
....................................................................................................................................................................................................................................
6 - 1 8
NCTL circuit pack are the same. This suggests that the software
on the active partition of the FlashDisk and the NCTL in Slot 10
has been corrupted in which case you want to replace it with a
fresh copy. Typically, this means downloading a fresh copy from
a remote NE or CIT-PC.
•
Download the code from the CD through the CIT to the
FlashDisk inactive partition and then click on
System Reboot
downloading software code from a remote NE.
............................................................................................................................................................
At the CIT, select
1
............................................................................................................................................................
Record the software release information from the line entry
2
.
release
..........................................................................................................................................................
Are the software releases different?
3
IF...
YES
NO
............................................................................................................................................................
Contact technical support to determine which of the two software
4
releases is supposed to be running in the system network element.
..........................................................................................................................................................
Is the correct software release stored in
5
IF...
YES
Lucent Technologies - Proprietary
See notice on first page
⇒
. Use this option as an alternative to
OK
⇒
Administration Software
THEN...
A software version mismatch may be
the cause. Continue with
determine the correct software version.
The software on the Active FlashDisk
Partition or in the NCTL in slot 4 is in
a corrupted state. Continue with
10 to install a fresh copy of the
software.
THEN...
Use this as the source for a fresh copy
to be installed. Continue with
for installation instructions.
Trouble Clearing Tasks
Administration
⇒
Download
inactive
Step 4
Step 2?
Step 6
365-575-783R1.1
Issue 1, June 2002
⇒
.
to
Step