Lucent Technologies LambdaXtreme Alarm Messages And Trouble Clearing Manual page 223

TAPs for PortOM_OD Alarm Group
TAP-302: Clear 'OMS LOS: 0GHz and
100GHz offset at OA (preamp)' and 'OMS
LOS: 50GHz and 150GHz offset at OA
(preamp)'
....................................................................................................................................................................................................................................
365-575-783R1.1
Issue 1, June 2002
............................................................................................................................................................
Replace the OA(Preamp). For details, go to
9
and/or Install Circuit Pack"
..........................................................................................................................................................
Examine the
10 NE Alarm List
IF...
YES
NO
............................................................................................................................................................
Remove the replacement circuit pack (installed in
11
the original circuit pack. For details, go to
Install Circuit Pack"
............................................................................................................................................................
Replace the RP. For details, go to
12
Circuit Pack" (7-20).
..........................................................................................................................................................
Examine the NE Alarm List
13
IF...
YES
NO
............................................................................................................................................................
Remove the replacement circuit pack (installed in
14
the original circuit pack. For details, go to
Install Circuit Pack"
..........................................................................................................................................................
Examine the
15 NE Alarm List
IF...
YES
NO
Lucent Technologies - Proprietary
See notice on first page
(7-20).
. Is the alarm condition still listed?
THEN...
Continue with
Go to Step
(7-20).
"DLP-608: Remove and/or Install
. Is the alarm condition still listed?
THEN...
Continue with
Go to Step
(7-20).
. Is the alarm condition still listed?
THEN...
Consult the appropriate maintenance
support organization for further
technical assistance.
Continue with
Trouble Clearing Tasks
"DLP-608: Remove
Step 11.
16.
Step 9) and reinstall
"DLP-608: Remove and/or
Step 14.
16.
Step 9) and reinstall
"DLP-608: Remove and/or
Step 16.
6 - 8 3