Tap-104: Clear 'Network Controller Failure - Lucent Technologies LambdaXtreme Alarm Messages And Trouble Clearing Manual

TAPs for the SLOT, SHELF, and FAN
Alarm Groups

TAP-104: Clear 'Network controller failure'

....................................................................................................................................................................................................................................
Overview
Procedure
....................................................................................................................................................................................................................................
365-575-783R1.1
Issue 1, June 2002
This procedure explains how to clear the
condition.
failure
Important! The installation of a replacement FlashDisk in the
FlashDisk slot of the NCTL circuit pack may generate certain
unexpected alarm conditions until the new software loads. Ignore
these indications until the software loads.
............................................................................................................................................................
Examine the
1 NE Alarm List
............................................................................................................................................................
Using the AID column, identify the appropriate shelf associated with
2
the NCTL failure.
The NCTL circuit pack is located in slot A1–3–4 in and End
Terminal, and slot A1–1–4 in a Repeater.
............................................................................................................................................................
Remove the appropriate shelf cover. For details, go to
3
Remove/Install Front Cover"
............................................................................................................................................................
CAUTION
The provisioning data for the Network Element is on the
FlashDisk. Ensure that the same FlashDisk from the NCTL is
inserted in the new NCTL.
CAUTION
SERVICE AFFECTING - If this procedure is not performed
properly, you can affect service.
Press the green Remove Flash button next to the FlashDisk. Wait for
4
several seconds until the green LED begins to blink steadily.
Lucent Technologies - Proprietary
See notice on first page
Network controller
.
(7-17).
Trouble Clearing Tasks
"DLP-607:
6 - 1 1