....................................................................................................................................................................................................................................

Baselining Commands

365-575-783R1.1

Issue 1, June 2002

The TL/1 threshold provisioning commands are:

•

SET-BASELINE-OCHAN for baselining analog parameters,

SPR-C and SPT-C

•

SET-BASELINE-OLINE for baselining analog parameters,

TOPT-OL and TOPR-OL

•

SET-BASELINE-SUPR for baselining analog parameter SPT-SU

The TL/1 retrieve commands used for retrieving the baseline values

are:

•

RTRV-BASELINE-OCHAN

•

RTRV-BASELINE-OLINE

•

RTRV-BASELINE-SUPR

Important! During initial installation, the baseline value for at least

one of the parameters SPR-C, SPT-C, TOPR-OL, TOPT-OL must be

established with an externally initiated user command. Once the

baseline value is established for at least one of the parameters, then

the other parameters will be automatically baselined for all existing

signal(s). Baselining is independent of external equipment, such as

when an Optical Spectrum Analyzer (OSA) is added or installed.

Lucent Technologies - Proprietary

See notice on first page

Performance Monitoring

4 - 1 7

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the LambdaXtreme and is the answer not in the manual?

Manual Baselining - Lucent Technologies LambdaXtreme Alarm Messages And Trouble Clearing Manual