Lucent Technologies LambdaXtreme Alarm Messages And Trouble Clearing Manual page 282

TAPs for PortOT Alarm Group
TAP-504: Clear 'Add side OC-48/STM-16
client synchronization failure'
....................................................................................................................................................................................................................................
6 - 1 4 2
..........................................................................................................................................................
Did the "Client Synchronization Failure" condition clear?
17
IF...
YES
NO
............................................................................................................................................................
As required, check for a damaged jumper, or bent or broken pins.
18
............................................................................................................................................................
Reinstall the original OT that was removed in
19
refer to "DLP-608: Remove and/or Install Circuit Pack"
............................................................................................................................................................
Connect the optical fibers to the original OT.
20
............................................................................................................................................................
Initiate a Trouble Report to the source of the failed incoming signal
21
indicating the type of failure. If the source of the failed incoming
signal returns a Trouble Report indicating "no trouble found", then
contact the appropriate maintenance support organization for further
technical assistance.
............................................................................................................................................................
Notify the person responsible for all service signals assigned to this
22
circuit pack that the signals can be returned to service.
............................................................................................................................................................
23 Reinstall the shelf cover. For details, refer to
Remove/Install Front Cover"
E S
N D O F T E P S
.........................................................................................................................................................................................................................................................
Lucent Technologies - Proprietary
See notice on first page
THEN...
Go to Step 22.
Continue with Step 18.
Step
"DLP-607:
(7-17).
Trouble Clearing Tasks
13. For details,
(7-20).
365-575-783R1.1
Issue 1, June 2002