Lucent Technologies LambdaXtreme Alarm Messages And Trouble Clearing Manual page 135

Fault Management
....................................................................................................................................................................................................................................
365-575-783R1.1
Issue 1, June 2002
menu option on the Map window toolbar. This GUI window allows
you to:
•
provision facility and equipment alarm delays
•
provision facility and equipment alarm clearing delays
•
enable or disable audio/visual alarm indicators
•
allow or inhibit the receipt of autonomous messages
•
enable or disable alarm latching. When alarm latching is enabled
for an NE, an alarm is removed from the Alarm List only when
the following conditions are met: 1) the alarm is cleared 2) the
alarm is acknowledged. Alarm acknowledgement may be done
before or after the alarm is cleared. For Alarm Latching to be
enabled for an NE, Alarm Latching Readiness must be enabled
during installation of the LambdaXtreme
Latching Readiness is disabled, by default.
Lucent Technologies - Proprietary
See notice on first page
Fault Management with Navis
™
Transport. Alarm
™
Optical EMS
5 - 1 1