Lucent Technologies LambdaXtreme Alarm Messages And Trouble Clearing Manual page 139

™
The Navis Optical EMS Logs
EMS activity log
....................................................................................................................................................................................................................................
365-575-783R1.1
Issue 1, June 2002
followed by its response. (If a command did not receive a response,
the display indicates this with the entry "time out.")
The user can filter the NE Command/Response Log on certain
parameters, including start date/time, end date/time, TID, and
aggregate. The system administrator can filter on these same
parameters, plus two more - command interface and user login ID.
The maximum number of days for which network command/response
data can be displayed is 7.
All user activities that are executed through the GUI as well as system
activities are stored in the Navis
in the EMS Activity Log. By using the Log Management feature, the
Activity Log can be browsed by the user and the information saved
and printed.
The user can filter the Activity Log on certain parameters including
start date/time, user, activity type, and selected activity. The maximum
number of days for which activity can be displayed is seven.
The activities are listed in the order they were received by the Navis
Optical EMS with the requested information.
The onset and termination of system overload conditions are also
logged in the Activity Log.
Lucent Technologies - Proprietary
See notice on first page
Fault Management with Navis
™
Optical EMS database and logged
™
Optical EMS
™
5 - 1 5