Lucent Technologies LambdaXtreme Alarm Messages And Trouble Clearing Manual page 191

TAPs for PortOA_RP and LINE Alarm
Groups
TAP-202: Clear 'DCM LOS'
....................................................................................................................................................................................................................................
365-575-783R1.1
Issue 1, June 2002
..........................................................................................................................................................
Is the measured loss within the expected range?
18
IF...
YES
NO
............................................................................................................................................................
Replace fibers to the DCM circuit pack until the combined loss of the
19
DCM and connected fiber jumpers is within the expected range. Go to
Step 21.
............................................................................................................................................................
Replace the DCM. For details, go to
20
Install Circuit Pack"
..........................................................................................................................................................
Examine the
21 NE Alarm List
IF...
YES
NO
............................................................................................................................................................
Reinstall the shelf cover. For details, go to
22
Front Cover" (7-17).
E S
N D O F T E P S
.........................................................................................................................................................................................................................................................
Lucent Technologies - Proprietary
See notice on first page
THEN...
Continue with
Go to Step
"DLP-608: Remove and/or
(7-20).
. Is the alarm condition still listed?
THEN...
Consult the appropriate maintenance
support organization for further
technical assistance.
STOP! YOU HAVE COMPLETED
THIS PROCEDURE.
Continue with
Trouble Clearing Tasks
Step 19.
20.
Step 22.
"DLP-607: Remove/Install
6 - 5 1