Lucent Technologies LambdaXtreme Alarm Messages And Trouble Clearing Manual page 34

Release 1.1
....................................................................................................................................................................................................................................
x x x i v
•
Never push objects of any kind into this product through slots as
they may touch dangerous voltage points or short out parts that
could result in a risk of fire or electrical shock. Never spill liquid
of any kind on the product.
•
Refer servicing to qualified service personnel.
•
Use caution when installing and modifying telecommunications
lines.
•
Never install telecommunication wiring during a lightning storm.
•
Never install telecommunication jacks in wet locations unless the
jack is specifically designed for wet locations.
•
Never touch uninsulated telecommunication wires or terminals
unless the telecommunication line has been disconnected at the
network interface.
•
Installation must include an independent frame ground conductor
to building ground. Grounding/bonding circuit continuity is vital
for safe operation of this equipment. Never operate with
grounding/bonding conductor disconnected.
•
This product has four -48Vdc (-60Vdc for ETSI and similar
applications) input power feeders per bay. Disconnecting one
power feeder will not de-energize the product. To reduce the risk
of injury, disconnect the four power supply cables when
removing power from the system.
•
Metallic telecommunication interfaces should not leave the
building premises unless connected to telecommunication devices
providing primary and secondary protection, as applicable.
•
For continued protection against risk of fire, replace only with
same type and rating of fuse.
•
Use only Lucent Technologies manufactured, recognized circuit
packs/units/modules. Refer to the LambdaXtreme Transport
Applications and Planning Guide, Release 1.1,
(365-575-780R1.1).
•
This equipment is intended for installation in Restricted Access
Locations where access is controlled or where access can only be
gained by service personnel with a key or tool. Access to this
equipment is restricted to qualified service personnel only.
Lucent Technologies - Proprietary
See notice on first page
About this information product
365-575-783R1.1
Issue 1, June 2002
,