....................................................................................................................................................................................................................................

Overview

Automatic Baselining

Manual Baselining

4 - 1 4

Baselining is defined as measuring the current power level and saving

it as the expected nominal operational value for that parameter. The

purpose of a baseline value is to provide a basis from which to

measure deviation from nominal in the parameter value.

Baselining optical power levels is done automatically or through a

user command (Manual Baselining or Re-Baselining), and applies to

provisionable parameters.

Automatic Baselining establishes a reference power level for optical

analog parameters at the time of baselining. If necessary, these

parameters can be re-baselined manually using TL/1 commands

All provisionable analog parameters can be manually baselined

through the CIT, or with user-initiated TL/1 commands using the CIT

or the EMS interface.

Lucent Technologies - Proprietary

See notice on first page

Performance Monitoring

365-575-783R1.1

Issue 1, June 2002

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the LambdaXtreme and is the answer not in the manual?

Analog Parameter Baselining - Lucent Technologies LambdaXtreme Alarm Messages And Trouble Clearing Manual