Lucent Technologies LambdaXtreme Alarm Messages And Trouble Clearing Manual page 31

Release 1.1
Electrostatic Discharge
....................................................................................................................................................................................................................................
365-575-783R1.1
Issue 1, June 2002
,
Laser Diode Compliance Label
A Laser Diode Compliance Label is attached to the non-component
side of each circuit pack containing a laser diode. This includes all
OA, OT, RP, RPG, and SUPVY circuit packs. See the figure below.
(ESD)
Introduction
The following information must be considered whenever working on
the LambdaXtreme Transport System, or one of its components.
CAUTION
Industry experience has shown that all integrated circuit
packs can be damaged by static electricity that builds up on
work surfaces and personnel. The static charges are
produced by various charging effects of movement and
contact with other objects. Dry air allows greater static
charges to accumulate. Higher potentials are measured in
areas with low relative humidity, but potentials high enough
to cause damage can occur anywhere.
Lucent Technologies - Proprietary
See notice on first page
About this information product
x x x i