GBC FusionPunch II Service Manual page 61

6. Check for continuity between P24A-INA8
on the Stacker I/O PWB and P24-8 on the
Punch I/O Daughter PWB. The cable
designation is the same for single stacker
or dual configurations, however, depending
on the problem stacker, be sure to check
the cable between the Stacker 1 I/O and its
Punch I/O Daughter PWB or the
Stacker 2 I/O PWB and its Punch I/O PWB
There is continuity between P24A-INA8
and P-8.
Y N
Repair or replace the harness
(PL 6.2A).
Replace the Punch I/O Daughter PWB
(PL 3.1).
GBC FusionPunch II Service Manual
12/2003
2-37
RAP 5.2 Stacker Tray Direction