GBC FusionPunch II Service Manual page 294

DocuSP 1.4.xxx to 2.xxx Print Queue Setup
The following procedure is to help the System Administrator set up print
queues for the FusionPunch II and other finishing devices that are inline
to the printer.
NOTE: A print queue is required for the FusionPunch II and one
for each additional finishing device down the line, such as a
Signature Booklet Maker (SBM).
1. From the DocuSP Monitor , go to the Queue Manager window, as
shown already open in Figure 6-23. If it is not open, go to the
DocuSP Print Services window and click the Queue Manager button.
Figure 6-23 DocuSP Monitor and Queue Manager Window
Host Machine Enablement (DocuSP)
If the Queue Manager screen is not open, click on the Queue
Manager icon, as shown in Figure 6-24.
Figure 6-24 Queue Manager Icon
Queue
Manager
2. Pull down the Queue menu from the toolbar and select New, as
Button
shown in Figure 6-25.
DocuSP
Print
New
Services
Window
Queue
Manager
Window
Figure 6-25 The Queue Menu in Queue Manager
12/2003
6-22
Queue Manager Icon
GBC FusionPunch II Service Manual