GBC FusionPunch II Service Manual page 358

Tag Numbers
Tag #: P2
Class: P (Part number change)
MFG Serial Numbers: NA
Name: Part number change
Purpose: Changed part numbers as FP 1 parts are not
interchangeable with the FP II. Old Part
numbers to be revised back to FP 1 revision
level.
Retrofit Kit #: NA
Reference: Parts effected
Part Number Description ................................................ Qnty
7610521 Shaft, Document Transport Main Drive ..............1
7610517 Assy., One Way Clutch Pulley, 16 Tooth ............1
Description of change:
Part Number Description of change
0130017400 / 7610521 Part number change only, reflected in the FP II
Service Manual revision 3.0. Part was originally
0130017400. It has been changed to 7610521
because the old and new parts are not
interchangeable between the FP 1 and the FP II.
0130017400 was revised back to the FP 1
revision level.
0130021000 / 7610517 Part number change only, reflected in the FP II
Service Manual revision 3.0. Part was originally
0130021000. It has been changed to 7610517
because the old and new parts are not
interchangeable between the FP 1 and the FP II.
0130021000 was revised back to the FP 1
revision level.
Tag Numbers
Date: 03/26/02
12/2003
6-86
Tag #: P3
Class: O (Optional)
MFG Serial Numbers: NA
Name: Caster Tag Retrofit P3.
Purpose: Replaces and repairs Casters with broken
welds.
Retrofit Kit #: NA
Reference: Parts Needed
Part Number Description ................................................ Qnty
7610514 Bushing, Stud, Caster Assy................................1
7610515 Collar, Threaded, Caster Assy. ..........................1
Description of change:
Part Number Description of change
7610514 Added new part to replace and repair broken
welds on Caster assemblies.
7610515 Added new part to replace and repair broken
welds on Caster assemblies.
Date: 03/26/02
GBC FusionPunch II Service Manual