GBC FusionPunch II Service Manual page 417

6. Secure the Bypass Assy to the Docking Bar, 2 Allen Head Cap
screws, 2 Lock Washers and 2 Flat Washers (Figure 8-11).
Figure 1-76 Securing the Bypass Assy to the Docking Bar
7. Mount the Bypass Diverter Cable Assy (2 Allen Head Cap screws)
and connect the Bypass Gate Solenoid connector (Figure 8-12).
BYPASS GATE
SOLENOID
CONNECTOR
BYPASS
DIVERTER
CABLE ASSY
Figure 1-77 Connecting the Bypass Gate Solenoid
GBC FusionPunch II Service Manual
8. Route the Bypass Diverter Cable Assy through the hole in the Stacker
I/O PWB mounting plate and connect it to the Stacker I/O PWB
connector J6B.
9. Remove the Bypass Motor Cover (4 Allen Head cap screws and 4
Lock Washers).
CAPACITOR
COVER
TRAY
MOTOR
Figure 1-78 Removing the Bypass Motor Cover
10. Mount the Bypass Motor to the Bypass Frame (2 Allen Head Cap
screws and 2 Lock Washers).
Figure 1-79 Mounting the Bypass Motor
12/2003
8-15
ALLEN HEAD CAP SCREWS (2)
LOCK WASHERS (2)
Bypass Kit Installation procedure