GBC FusionPunch II Service Manual page 321

DocuColor 6060 Profile Setup and Profiles
NOTE: Profile values can be set through the IOT UI by a trained operator at any time after the CSE has installed the DFA Device. The value
and usage of the profiles and functions are the responsibility of the DFD.
1. Use the Access button to activate the pathway options. After entering the password correctly the Tools Pathway window will display, as shown in
Figure 6-53.
2. Click the Tools Pathway option, as shown in Figure 6-53.
Tools
Pathway
GBC FusionPunch II Service Manual
Figure 6-53 The Pathway Options
12/2003
6-49
Host Machine Enablement (DocuColor 6060)