GBC FusionPunch II Service Manual page 404

Installation
Note: Tag F99 IOT Kit MUST be installed in all DT61XX machines that
will be installed together with the FusionPunch II. (Xerox Kit
#600K67500). This kit enables proper Set and Page Ack (S3 and S4) C6
and C7 are not supported by the Fusion Punch II at this time.
WARNING
Do not connect the Power Cord to the Punch and Stacker until
you are instructed.
The combined shipping weight of the Punch and Stacker is
approximately 800 pounds (363 Kg). To avoid accidents, do
not lift the equipment into place before installing.
Electrostatic
Discharge
Certain components in this product are susceptible to damage from
electrostatic discharge. Observe all ESD procedures to avoid
component damage.
Preparing for installation
1. Prepare for installation
a. Inspect all shipments for damage. If significant damage exists,
contact the shipper before proceeding.
b. Compare the contents of the shipping crates and the packing list.
2. Before Installing the system, ensure that Tag # P1 and S1 have been
installed in the Punch and each Stacker. Refer to the Service Manual
Section 6 for the Tag Matrix information.
Installation
Product Code
0136000000 FP II Dom Punch
7610462 FP II Punch Power Cord
7610205 FP II User Guide
0136100000 FP II Dom Stacker
7610462 FP II Stacker Power Cord
0136100100 FP II Dom Bypass Stacker
0136100400 FP II Dom Bypass Kit
Product Code
0136000200 FP II Intl Punch
6200060 FP II Punch Power Cord (UK)
6200002 FP II Punch Power Cord (Europe)
6200016 FP II Punch Power Cord (Australia)
6200015 FP II Punch Power Cord (Switzerland)
7610205 FP II User Guide
0136100200 FP II Intl Stacker
6200060 FP II Stacker Power Cord (UK)
6200002 FP II Stacker Power Cord (Europe)
6200016 FP II Stacker Power Cord (Australia)
6200015 FP II Stacker Power Cord (Switzerland)
0136100300 FP II Intl Bypass Stacker
0136100500 FP II Intl Bypass Kit
12/2003
8-2
Domestic
Description
International
Description
GBC FusionPunch II Service Manual
Qty.
1
1
1
1
1
1
1
Qty.
1
1
1
1
1
1
1
1
1
1
1
1
1