Table of Contents
Advertisement
The Finishing screen displays, as shown in Figure 6-22.
External Finisher
Check Box
Figure 6-22 Finishing screen in the Finishing Window
10. Ensure that the External Finisher Checkbox is checked and the name
of the device appears in parentheses to the right of External Finisher,
as shown in Figure 6-22.
This completes the Profile setup. Go now to the Print Queue setup
procedure that follows.
NOTE: If you have more than one finishing device inline with the
printer, you must set up a profile for each. To do so, repeat this
profile setup procedure for each finishing device.
GBC FusionPunch II Service Manual
12/2003
6-21
Host Machine Enablement (DocuSP)
Advertisement
Chapters
Table of Contents
