GBC FusionPunch II Service Manual page 316

Host Machine Enablement (DT135 / 4XXX)
Xerox 4xxx NPS Host Machine Enablement
The procedure that follows describes how to configure a GBC profile for Xerox 4000
Family NPS printing systems. This profile allows you to send a job through a
network and then change the output destination at the Sun NPS Workstation. Once
you have set up the GBC profile, you will be required to configure a GBC Print
Queue. You will then have to set up a new printer on all of the computers used to
send jobs through the network and ensure that they are all using the production print
software to send jobs.
This setup, once completed, will allow the customer to send a job to a GBC Print
Queue. The GBC Print Queue ensures that jobs print to the Bypass and the Fusion
Punch with the correct profile settings.
Configuring the GBC Personality Profile
1. Switch on the GBC Fusion Punch and ensure that it is Online.
2. At the Sun NPS Workstation, point the cursor to a blank part of the screen,
right-click the mouse and select Restart.
The system will reboot.
3. Type Priv admin (space) and press Enter.
The system will prompt you for a password.
4. Type administrator as your password.
The prompt, Ps Admin displays. You are now at the System Administrator
logon level.
Type Create Output Profile and press Enter .
5.
The system prompts you to enter a name.
Type GBCPunch and press Enter .
6.
The prompt, P1 displays. This is the first profile parameter.
7. Answer the parameter prompts as follows:
P1 = 0, P2 = 0, P3 = 0, P4 = 0, P5 = 0, P6 = 0, P7 = 7, P8 = 0,
P9 = 0, P10 = 0, P11 = 0
8. Repeat Step 2 to reboot the Workstation. After the system has rebooted, go to
Step 9.
9. Type Set Output Profile and press Enter.
The system will prompt you for the name of the profile.
10. Type GBCPunch and press Enter.
The system will display a message indicating that the profile is set. You have
completed creating and setting the GBC Profile.
11. To view the profile, type List Output Profile (or Show Output Profile)
and press Enter.
Host Machine Enablement (DT135 / 4XXX)
Xerox 4xxx Output Profile
1. Type Set Output Profile and press Enter.
The system will prompt you for the name of the profile.
2. Type the name of the profile exactly as it was originally entered
and press Enter.
The system will display a message indicating that the profile is set.
Configuring a GBC Print Queue
1. Type Priv admin (space) and press Enter.
The system will prompt you for a password.
2. Type administrator as your password.
The prompt, Ps Admin displays. You are now at the System
Administrator logon level.
3. Type Create Virtual Printer and press Enter.
The system prompts you to enter a name.
4. Type GBCPunch and press Enter.
5. Type Change Virtual Printer and press Enter.
6. Type Output Bin and press Enter.
The system will prompt you for an attribute value.
7. Type 258 and press Enter.
This value tells the system to run the output to the Bypass Transport
12/2003
6-44
.
GBC FusionPunch II Service Manual