GBC FusionPunch II Service Manual page 357

Tag Numbers
Tag #: P1
Class: M (Mandatory)
MFG Serial Numbers: NH06764
Name: Multiple Stacker and Bypass Stacker
Configuration Kit.
Purpose: Allows addition of Bypass Stacker (S). Also
improves punching quality, stacking quality,
and signal timing.
Retrofit Kit #: 7610509
Reference: Parts included in kit.
Part Number Description .................................................Qnty
7610508 E-prom with version A516 or higher .................. 1
0130017200 Pulley, 32 Tooth,
Document Transport Main Drive ........................ 1
7610517 Assy., One Way Clutch Pulley, 16 Tooth ............ 1
7610458 PWB, Little Star Controller Expansion ............... 1
7610452 PWB, Daughter.................................................. 1
1980015 SHCS 4-40 x 5/8................................................ 4
1925062 Washer, Flat #4.................................................. 4
1926060 Washer, Lock #4 ................................................ 4
7610224 Guide, Paper, Interface Left............................... 1
7610225 Guide, Paper, Interface Right ............................ 1
0130014700 Tie Bar, Interface Ball Track Assy...................... 1
1980052 SHCS 8-32 x 3/4................................................ 4
1925064 Washer, Flat #8.................................................. 4
1926062 Washer, Lock #8 ................................................ 4
7610244 Paper Guide, Document Transport Long ........... 3
0130035700 Side Guide, Punch............................................. 1
1925230 Washer, Flat, Non-Metallic................................. 1
GBC FusionPunch II Service Manual
Date: 10/01/01
12/2003
6-85
Description of change:
Part Number Description of change
7610508 Currently A173 only supports a Single Stacker
Configuration.
0130017200 Was 30 Tooth Pulley, Changed to 32 Tooth
Pulley for consistent speeds.
0130021000 / 7610517 Was 18 Tooth Pulley, Changed to 16 Tooth
Pulley with One Way Clutch Bearing.
7610458 Addition
Expansion PWB to support all configurations.
7610452 Addition of second Daughter PWB to support all
configurations.
1980015 SHCS 4-40 x 5/8 - Addition of hardware to mount
PWB's above.
1925062 Washer, Flat #4 - Addition of hardware to mount
PWB's above.
1926060 Washer, Lock #4 - Addition of hardware to mount
PWB's above.
7610224 Upgraded Paper handling of one sided and Up
curled paper.
7610225 Upgraded Paper handling of one sided and Up
curled paper
0130014700 Modified to mount Paper Guides above.
1980052 SHCS 8-32 x ¾ - Addition of hardware to mount
Paper Guides above.
1925064 Washer, Flat #8 - Addition of hardware to mount
Paper Guides above.
1926062 Washer, Lock #8 - Addition of hardware to mount
Paper Guides above.
7610244 Paper Guide, Document Transport Long -
Shorten in height by 1/8 inch.
7610374 & 7610375 Remove last Delrin Ball from right, exchange 2nd
from right Steel Ball with 2nd from left Delrin Ball
0130035700 Side Guide, Punch - Cut notch to resolve
interference with Punch Tension Strap Assy.
1925230 Added washer between Pulley and mounting
block of the Punch Infeed Idler Pulley.
of second Little Star Controller
Tag Numbers