GBC FusionPunch II Service Manual page 347

Principles of Operation
Document Finishing Architecture
Document Finishing Architecture (DFA) is the term for the communica-
tions between the printer and an External Finishing Device. Fusion-
Punch II currently supports most DFA signals. In the following tables is
a list of the printer families, Statuses and supported Command Signals.
The most commonly used signals with the FusionPunch II as an end
device (last External Finishing Device in the line) are as follows:
Note: The DT 61xx Family is not listed as it supports all DFA sig-
nals.
Note: All Sx Signals are known as Status Signals and All Cx are
known as Command Signals.
Table 1 – Status Signal Product Chart
GBC FusionPunch II Service Manual
Table 2 – Command Signal Product Chart
12/2003
6-75
Principles of Operation