GBC FusionPunch II Service Manual page 322

The Tools Mode Window will display, as shown in Figure 6-54.
NVM
Read / Write
3. Select Machine Defaults 3 tab if your DocuColor 6060 has a scanner.
Select Machine Defaults 2 tab if your DocuColor 6060 does not have a scanner, as shown in Figure 6-54.
4. If you would like to review the currently loaded profiles, click the Finishing System Module Profile button, as shown in Figure 6-54.
5. Click the NVM Read / Write option, as shown in Figure 6-54.
Host Machine Enablement (DocuColor 6060)
Figure 6-54 The Tools Mode Window
12/2003
6-50
Machine
Default 3
Machine
Default 2
System
Module
button
GBC FusionPunch II Service Manual