GBC FusionPunch II Service Manual page 365

Section Contents
Title
BSDs
Chain 1.1 Main Power BSD - - - - - - - - - - - - 2
Chain 1.2 DC Power Distribution BSD - - - - 3
Chain 1.3 Punch Interlock Switches BSD - - 4
Chain 1.4 Stacker Interlock Switches BSD - 5
Chain 2.1 Control Panel BSD- - - - - - - - - - - 6
Chain 3.1 Punch/Printer Communications
BSD - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
Chain 3.2 Stacker/Third Party
Communications BSD - - - - - - - - - - - - - - - 8
Chain 4.1 Punch Transport Sensors BSD - - 9
Chain 4.2 Punch Outputs BSD- - - - - - - - - 10
Chain 12.1 Stacker Inputs BSD - - - - - - - - 11
Chain 12.2 Stacker Outputs BSD - - - - - - - 12
Chain 12.2 Stacker Outputs BSD - - - - - - - 13
Component Locators
Punch Interlocks - - - - - - - - - - - - - - - - - 14
Punch Power Switch and Line Filters - - - - 16
Punch PWBs - - - - - - - - - - - - - - - - - - - - - 18
Punch Sensors- - - - - - - - - - - - - - - - - - - - 20
Punch Motors A - - - - - - - - - - - - - - - - - - - 22
Punch Motors B - - - - - - - - - - - - - - - - - - - 24
Punch Solenoids - - - - - - - - - - - - - - - - - - 26
Stacker Switches A - - - - - - - - - - - - - - - - - 28
Stacker Switches B - - - - - - - - - - - - - - - - 30
Stacker PWBs - - - - - - - - - - - - - - - - - - - - 32
Stacker Motors and Solenoids - - - - - - - - - 34
Bypass Stacker Motors, Solenoids,
and Sensors- - - - - - - - - - - - - - - - - - - - - - 36
GBC FusionPunch II Service Manual
Introduction
Page
This section contains connector and PWB
location drawings and pin assignment
information.
This information is not specific to individual
procedures, but is provided for general
reference.
Connector numbers are repeated on more
than one component.
10/2001
7-1
7. Wiring Data