GBC FusionPunch II Service Manual page 361

Tag Numbers
Tag #: S1
Class: M (Mandatory)
MFG Serial Numbers: NG01644
Name: Stacking Quality Kit
Purpose: Improves Stacking Quality
Retrofit Kit #: 7610510
Reference: Parts included in kit.
Part Number Description .................................................Qnty
1981305 Belt, Timing, 110xl O-ring Drive Assy................. 1
0130040200 Pulley, Timing, 18 Tooth..................................... 1
7610222 Pulley, 18 Tooth, Stacker O-ring Motor .............. 1
7610095 Rod, Tie, O-ring Drive Assy. .............................. 1
Description of change:
Part Number Description of change
1981305 Changed from 120xl to 110xl timing belt to
accommodate pulley change below.
0130040200 Changed from 32 Tooth Pulley to 18 Tooth
Pulley
7610222 Changed from 16 Tooth Pulley to 18 Tooth
Pulley
7610095 Lengthened Tie Bar 1/8 of an inch to decrease
buckling of stack.
7610680 Plate, Docking, Female - moved Pim nuts ¼ inch
to the right when viewing from front the machine
(Operators side). Allows proper docking of down
stream devices.
GBC FusionPunch II Service Manual
Date: 10/01/01
12/2003
6-89
Tag #: S2
Class: M (Mandatory)
MFG Serial Numbers: NG01644
Name: Curl Up Stacking Quality Kit
Purpose: Improves Curl Up Stacking Quality
Retrofit Kit #: 7610512
Reference: Parts included in kit.
Part Number Description ................................................. Qnty
7610223 Assy., Paper guide, Stacker In-feed /
Wire Form Assy. ................................................ 1
7610046 Tapper, Short, Stacker Assy............................... 3
Description of change:
Part Number Description of change
7610223 Remove old Stacker In-feed Paper Guide Assy.,
and replace with new Assy., which includes Wire
Form Assy. for handling curl up.
7610046 Added 3 short Tappers (7610046) to replace the
3 Long Tappers (7610076). Do not need Long
Tappers once the Stacker Wire Form Assy. is
installed. Long Tappers created too much weight
on the Tapper Solenoid and this update should
improve the life of the Stacker Tapper Solenoids
as well.
Date: 10/01/01
Tag Numbers